View Cart
  • (888) 444-6356 | M-F: 7:30am-Noon & 1pm-4:30pm | Sat. & Sun.: Closed

M-F: 7:30am-Noon & 1pm-4:30pm | Sat. & Sun.: Closed
14950 US-68, Mt Orab, OH 45154

8″ Deep reach 2 or 3 jaw gear puller

8″ Deep reach 2 or 3 jaw gear puller

$30.00

Description

This Pro-Grade Tools 18203 8″ adjustable 2 or 3 Jaw Gear Puller has 8″ of reach and can pull all the bearings and sprockets on your Abrasive Recovery System.

It makes a difficult job much easier. I wouldn’t attempt to pull off a sprocket or bearing without one. 3 jaws work great on the sprockets and 2 jaws work great on the bearings.

I try to always keep these in stock because they are a great tool for the job.

You can also get this Pro-Grade Tools 18203 8″ adjustable 2 or 3 Jaw Gear Puller from Amazon.com here: https://www.amazon.com/gp/product/B002O16UES/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1

Harbor Freight Tools part# 69224 is a good 8″ deep 3 jaw gear puller that works great for sprockets but it’s hard to pull the pillow block bearings with a 3 jaw gear puller. A 2 jaw gear puller works better on pillow block bearings and Harbor Freight has a 2 jaw puller set part# 64305 but the deepest puller is only 6″ which is a little too short to pull the pillow block bearings on the motor side. It will pull all the other bearings easily though. If you are in a pinch and need a puller right away you can can get the job done with the Harbor Freight part# 69224 & 64305 pullers.